R&S FSMR, Руководство по эксплуатации

Страница: 562 / 955

CALCulate:LIMit Subsystem R&S FSMR
1313.9723.12 6.1-26 E-1
CALCulate<1|2>:LIMit<1 to 8>:ACPower:ACHannel[:RELative]:STATe ON | OFF
This command activates the limit check for the relative limit value of the adjacent channel when
adjacent channel power measurement is performed. Before the command, the limit check must be
activated using
CALCulate:LIMit:ACPower:STATe ON
.
The result can be queried with
CALCulate:LIMit:ACPower:ACHannel:RESult?
. It should be
noted that a complete measurement must be performed between switching on the limit check and
the result query, since otherwise no valid results are available.
The numeric suffixes <1 to 8> are irrelevant for this command.
Example: "
CALC:LIM:ACP:ACH 30DB, 30DB"
'Sets the relative limit value in screen A for
'the power in the lower and upper adjacent
'channel to 30 dB below the channel 'power.
"
CALC:LIM:ACP:ACH:ABS -35DBM, -35DBM"
'Sets the absolute limit value in screen A
'for the power in the lower and upper
'adjacent channel to -35 dBm.
"
CALC:LIM:ACP ON"
'Switches on globally the limit check for the
'channel/adjacent channel measurement in
'screen A.
"
CALC:LIM:ACP:ACH:REL:STAT ON"
'Switches on the check of the relative limit
values for adjacent channels in 'screen A.
"
CALC:LIM:ACP:ACH:ABS:STAT ON"
'Switches on the check of absolute 'limit
values for the adjacent channels in 'screen A.
"INIT;*WAI"
'Starts a new measurement and waits for
'the sweep end.
"
CALC:LIM:ACP:ACH:RES?"
'Queries the limit check result in the
'adjacent channels in screen A.
Characteristics: *RST value: OFF
SCPI: device-specific
CALCulate<1|2>:LIMit<1 to 8>:ACPower:ACHannel:RESult?
This command queries the result of the limit check for the upper/lower adjacent channel in the
selected measurement window when adjacent channel power measurement is performed.
If the power measurement of the adjacent channel is switched off, the command produces a query
error.
The numeric suffixes <1 to 8> are irrelevant for this command.
Parameter: The result is returned in the form <result>, <result> where
<result> = PASSED | FAILED, and where the first returned value denotes the
lower, the second denotes the upper adjacent channel.
Example: "
CALC:LIM:ACP:ACH 30DB, 30DB"
'Sets the relative limit value in screen A for the
'power in the lower and upper adjacent
'channel to 30 dB below the channel power.
"
CALC:LIM:ACP:ACH:ABS -35DBM, -35DBM"
Sets the absolute limit value in screen A
'for the power in the lower and upper
'adjacent channel to -35 dB.
"
CALC:LIM:ACP ON"
'Switches on globally the limit check for the
'channel/adjacent channel measurement in
'screen A.
"
CALC:LIM:ACP:ACH:STAT ON"
'Switches on the limit check for the adjacent
'channels in screen A.
"INIT;*WAI"
'Starts a new measurement and waits for
the 'sweep end.