R&S 1424.7005.02, Руководство пользователя

Страница: 133 / 514

Saving and Recalling Settings
R&S
®
NRX
133 User Manual 1178.5566.02 ─ 07
3. Tap "Recall".
Preset ..........................................................................................................................133
Save / Recall Setup .....................................................................................................133
Save ............................................................................................................................ 133
Setup Name ................................................................................................................ 133
Recall .......................................................................................................................... 133
Preset
Sets the R&S NRX and the connected R&S power sensors to a defined initial state.
Thus, you can change parameter values from a well defined starting point.
If the default setting of the R&S NRX is not compatible with the sensor, either the
default settings are adapted for the sensor or a setting conflict results. See also
Chap-
ter 5.5, "Settings Conflict" , on page 47.
For details on sensor settings, see the user manual of the R&S power sensor.
Remote command:
SYSTem:PRESet
on page 388
*RST
on page 179
Save / Recall Setup
Selects the setup file in which the instrument settings are saved.
Remote command:
MEMory:STATe:DEFine
on page 384
MEMory:STATe:MAP
on page 384
Save
Saves the current instrument settings in the selected setup file.
Remote command:
*SAV
on page 179
Setup Name
Selects the setup file from which to load the instrument settings.
Remote command:
MEMory:STATe:DEFine
on page 384
MEMory:STATe:MAP
on page 384
Recall
Restores the selected instrument settings.
Remote command:
*RCL
on page 179
www.allice.de Allice Messtechnik GmbH