Operating Concepts
R&S
®
NRX
31
User Manual 1178.5566.02 ─ 07
4
Operating Concepts
4.1
Manual Operation
Using the graphical user interface of the R&S NRX and the keys on the front panel,
you can easily configure the settings and measure in the provided measurement
modes.
Using the touchscreen
A touchscreen allows you to interact with the software using various finger gestures on
the screen. The basic gestures supported by the software and most applications are
described here. Further actions using the same gestures may be possible.
Tap
= touch the screen quickly, usually on a specific element. You can tap most ele-
ments on the screen to access the settings belonging to that element (topic).
In graphs, use the following gestures:
●
Pan
= put your fingers on the touchscreen and move them while keeping contact.
Thus, you can bring offscreen extensions of the graph into view.
●
Pinch
= move two fingers toward each other to change the zoom.
Going back to a higher hierarchy level
The [Esc] key is the essential control element to navigate back, for example after you
have opened a dialog by tapping an element.
► Press
shortly to change to the next-higher hierarchy level.
► Keep
pressed to go to the highest hierarchy level, the start dialog.
4.1.1
Start Dialog
1. Connect a power sensor to the R&S NRX.
Chapter 3.1.8, "Connecting Power Sensors"
2. Boot the R&S NRX.
After successful booting, the R&S NRX displays the start dialog.
Manual Operation
www.allice.de
Allice Messtechnik GmbH
