RACOM M!DGE3, Руководство пользователя

Страница: 77 / 183

Enable address
List box {On; Off}, default = "On"
Note
Informational note
IP
Default = 0.0.0.0
Defines the IP address, which will be set on the loopback interface.
7.2.2. BABEL
BABEL is a loop-avoiding distance-vector routing protocol that is designed to be robust and efficient
both in networks using prefix-based routing and in networks using flat routing ("mesh networks"), and
both in relatively stable wired networks and in highly dynamic wireless networks (for more information
see
RFC6126
2
).
BABEL is also a dynamic routing protocol for Internet Protocol (IP) networks. It is an Interior Gateway
Protocol (IGP) working within one Autonomous system. It is based on OSPF protocol (see the next
chapter for OSPF protocol description) with the following differences:
• Works within one autonomous system
• BABEL provides both wired and wireless type of network interface
BABEL protocol is typically used in the networks containing radio hops.
2
https://datatracker.ietf.org/doc/html/rfc6126.html#section-1.1
77 © RACOM s.r.o. – M!DGE3 Cellular Router
Settings