RACOM M!DGE3, Руководство пользователя

Страница: 72 / 183

Amount of failed tests, after which is the link declared to be non-functional.
Target address
IP address, default = 0.0.0.0
Primary tested IP address.
Enable second target address
List box {On; Off}, default = "On"
Enables / Disables testing of the second IP address.
Second target address
IP address, default = 0.0.0.0
Secondary tested IP address
Test mode
List box {One address succeeds; Both addresses succeeds}, default = "One address succeeds"
Defines the success of the test:
• One address succeeds - only one address is enough to pass the test.
• Both addresses succeeds - both addresses must pass the test.
Note
If the connection to SIM card fails (missing SIM, wrong PIN), all profiles using that SIM will be
blocked. If all profiles are blocked, the whole Cellular interface service will be blocked.
7.1.4.1.4. Profile switching
In case of a malfunction of the current running profile, the module switches automatically to another (if
it is defined). If the module has no more defined profiles to switch to, it switches back to the first one.
After defined time period, the module will try to reconnect via the first profile again (independently on
the profile queue). This section occurs only, if parameter
Profile switching is set to "On".
Fig. 7.2: Link testing scheme
M!DGE3 Cellular Router – © RACOM s.r.o. 72
Settings