RACOM M!DGE3, Руководство пользователя

Страница: 9 / 183

PC connected via ETH/USB adapter
External ETH/USB adapter Part No. OTH-USB/ETH-XR (an optional accessory of the M!DGE3 see
ETH/USB adapter
2
). The ETH/USB contains a built-in DHCP server, so if you have a DHCP client
in your PC as most users, you do not need to set anything up. The default IP address of M!DGE3
unit, for access over the ETH/USB adapter, is 10.9.8.7.
PC connected directly to an ETH port
The default IP address for access via ETH ports is 192.168.169.169.
Set a static IP address in PC to 192.168.169.0/24 (e.g.192.168.169.250, subnet mask
255.255.255.0).
Important
When you change the M!DGE3 ETH address to a different IP address/mask, the IP address
of your PC might be necessary to be updated to match the same subnet (mask).
Note
https - For security reasons the http protocol with ssl encryption can be used for the commu-
nication between the PC and M!DGE3. The https protocol requires a security certificate. You
must install this certificate into your web browser. The first time you connect to the M!DGE3,
your computer will ask you for authorisation to import the certificate into your computer. The
certificate is signed by the certification authority RACOM s.r.o. It meets all security regulations
and you need not to be concerned about importing it into your computer. Confirm the import
with all warnings and exceptions that your browser may display during installation.
Note
If you do not have the USB adapter or you have forgotten the password, you can reset the
access parameters to defaults, see
Section 2.2.8, “HW button” .
2
https://www.racom.eu/eng/products/radio-modem-ripex.html#accessories_ethusb
9 © RACOM s.r.o. – M!DGE3 Cellular Router
Quick guide