RACOM M!DGE3, Руководство пользователя

Страница: 95 / 183

Password for the MD5 authentication .
Passive
List box {On; Off}, default = "Off"
Passive BGP router does not initiate connection to a neighbor, it is waiting for the neighbor activity.
Hold interval [s]
Number {3 – 10800}, default = 240
Time (in seconds) to wait for the keepalive message from the neighbor. It is negotiated with the
neighbor. When it expires, the connection is treated as interrupted.
Keepalive interval [s]
Number {1 – 3600}, default = 80
Period (in seconds) of sending keepalive messages. It should not be longer than 1/3 of the
Hold
interval .
Connection retry interval [s]
Number {1 – 3600}, default = 120
Time (in seconds) to wait before trying to re-connect the interrupted connection.
TTL security
List box {On; Off}, default = "On"
Protection against BGP packets spoofing.[PP1] The Generalized TTL Security Mechanism (GTSM
– RFC 5082) is used. BGP transmits packets with known TTL value. Incoming packets having lower
than expected value (expected number of hops) are discarded.
Expected hops
Number {2 – 32}, default = 2
Number of expected hops between the neighbors
Route reflector client
List box {On; Off}, default = "Off"
Defines if this neighbor is a client of this (this unit) Route reflector.
Set cost
List box {On; Off}, default = "Off"
Enables to set a specific
Cost of the BGP connection.
Cost
Number {0 – 2
32
-1}, default = 10
The cost of connection to this neighbor. The higher the number the higher the cost. It enables to
make decisions inside the router between multiple paths from the same neighbor.
Next hop self
List box {Off; Always; Internal; External}, default = "Off"
Defines it the exported routing rules should have ‘next hop’ addresses overwritten to the address
of this router. "Internal" overwrites only the rules from the local AS. "External" overwrites only the
rules from the other AS.
7.2.4.4. Static rules
Pre-defined static routing rules to be exported over the BGP protocol. Maximum number of rules is
256.
95 © RACOM s.r.o. – M!DGE3 Cellular Router
Settings