RACOM M!DGE3, Руководство пользователя

Страница: 94 / 183

nection to this Route reflector. Route reflector and its clients form a ‘cluster’. See more details at
the beginning of the BGP chapter.
Cluster ID type
List box {Router ID; Manual}, default = "Router ID"
Controls the iBGP cluster identification. Cluster identification must be the same inside the cluster
and it has to be different in another cluster. If the "Router ID" is selected, the
Router ID value is
used as a cluster id.
Cluster ID
IP address, default = 0.0.0.0Cluster identification in the format of an IP address. This IP address
does not have to be ‘real’ (valid).
7.2.4.3. Neighbors
Neighboring BGP routers. Maximum number of neighbors is 256.
Active
List box {On; Off}, default = "On"
Enables the specific neighbor.
Note
Informational note.
Neighbor type
List box {Internal; External}, default = "External"
Neighbor router type selection. "Internal" neighbor belongs to the same AS (iBGP). "External" belongs
to other AS (eBGP).
Neighbor AS
Number {0 – 2
32
-1}, default = 65000
Neighbor AS number.
Neighbor IP
IP address, default = 0.0.0.0
Neighbor router IP address.
Local IP of the connection
IP address, default = 0.0.0.0
Local IP address of the connection. Default value 0.0.0.0 provides automatic set up of this address
– from the routing.
Neighbor connection
List box {Direct; Multihop}, default = "Direct"
Network connection type between the neighbors. "Direct" means direct – one hop – connection.
This is typical for eBGP routers. "Multihop" means connection over the multiple routers. This is
typical for iBGP routers.
MD5 authentication
List box {On; Off}, default = "Off"
Enables BGP packets authentication using TCP MD5 Signature extension.
Password
String {up to 128 char}
M!DGE3 Cellular Router – © RACOM s.r.o. 94
Settings