RACOM M!DGE3, Руководство пользователя

Страница: 140 / 183

Note
This parameter will work only if parameter SMS notifications EXT is enabled.
7.6.5.3. SMS commands
All commands must match following format:
<password>"space"<command>"space"[<param1>...]
SMS commands:
cellstatus
Example: public cellstatus
Request for SMS with extract of Cellular status of the module, which received the SMS.
Reply of command "cellstatus":
Station: <station_name>
<module_type> <SIM> Profile <profile_id>
Status: <connection_state>
Reg: <registration_state>
Net: <PLMN>
Svc: <service_type>
Band: <band>
Signal: <signal_strength>
APN: <username_APN>
IP: <assigned_IP>
Example of reply for command "cellstatus":
Station: Alef
AUX SIM2 Profile 1
Status: CONNECTED
Reg: RegHome
Net: 23002
Svc: 2G_EDGE
Band: ARFCN 77
Signal: RSSI: >=-48 dBm
APN: internet
IP: 100.110.103.173
smsevent <param>
Example: public smsevent raise
This command is used to turn on/off alarms which can be set in Section 7.6.3, “Events” by using
its parameters ("raise", "clear").
This command does not generate an automatic reply.
7.6.6. SW keys
Certain M!DGE3 features needs to be activated by a SW key to be available. When the respective SW
key is not present, the feature cannot be configured. If the feature is enabled in a configuration backup
file and the file is loaded to a unit which is not equipped with the respective key, the configuration is
refused (no changes are made in the unit).
Here is the list of available SW keys and their assignment to offered SW key packages.
M!DGE3 Cellular Router – © RACOM s.r.o. 140
Settings