RACOM M!DGE3, Руководство пользователя

Страница: 91 / 183

OSPF tag
Number {0 – 2
32
-1}, default = 0
OSPF tag to be compared.
Action
List box {Accept; Reject; Pass}, default = "Accept"
Type of action to be performed when the filter rules above matches the incoming routing rule.
Set preference
List box {On; Off}, default = "Off"
When enabled, the
Preference (see next parameter) will be set to this rule.
Preference
Number {0 – 65535}, default = 200
Routing rule preference in the routing table (to be used when
Set preference is enabled). The
higher the number the better the preference.
Local preferred source address
IP address, default = 0.0.0.0
Preferred source IP address for the locally generated packets. When disabled (default value 0.0.0.0
is used), the source IP address is set according to the outgoing interface.
Note
Informational note
7.2.3.9. Export filter
OSPF export filter rules define set of routing rules to be exported from the unit into the OSPF area.
The order of rules matters. Maximum number of filter rules is 256.
Active
List box {On; Off}, default = "Off"
Enables / disables the filter rule.
Note
Informational note
Filter network
List box {Off; Match; Not match}, default = "Off"
Selects a method of the routing rule destination range comparison.
Network IP / Network mask
IP address, default = 0.0.0.0/0
IP address and mask defines the network prefix to be compared
Mask from
Number {0 – 32}, default = 0
Mask to
Number {0 – 32}, default = 32
Definition of the enabled range of the mask length of the processed routing rule.
Filter protocol
List box {Off; Match; Not match}, default = "Off"
91 © RACOM s.r.o. – M!DGE3 Cellular Router
Settings