RACOM M!DGE3, Руководство пользователя

Страница: 104 / 183

Enable
List box {Enable; Disable}, default = "Disable"
Enables / disables all Source NAT rules.
Parameters “ Protocol ”, “ Source IP / Mask ” , “ Destination IP / Mask ” , “Output Interface” ,“ Source
port from ”, “ Source port to ”, “ Destination port from ”, “ Destination port to ” and “ Protocol
number ” define a filter, which is capturing specified packets. SNAT rule applies for those packets.
Parameters “ Source port from ”, “ Source port to ”, “ Destination port from ” and “ Destination
port to ” occur only if parameter “ Protocol ” is set to “UDP” or “TCP”.
Parameter “ Protocol number ” occurs only if parameter “ Protocol ” is set to “Other”.
Protocol
List box {All; ICMP; UDP; TCP; GRE; ESP; Other}, default = "All"
Filters selected protocol. If none of the mentioned values suits, select “Other”.
Protocol number
Number {0 – 255}, default = 1
This parameter occurs only, if parameter “
Protocol ” is set to “Other”.
Source IP / Mask
IP address, default = 0.0.0.0/0
Defines the source IP subnet.
Source port (from) / Source port (to)
Number {0 – 65535}, default = 0
Defines the range of values of source port. Value 0 means, that it is not filtered according to the
source port. If only one port is required, set both parameters to the same number. These parameters
occur only, if parameter “
Procotol ” is set to “UDP” or “TCP”.
Destination IP / Mask
IP address, default = 0.0.0.0/0
M!DGE3 Cellular Router – © RACOM s.r.o. 104
Settings