RACOM M!DGE3, Руководство пользователя

Страница: 132 / 183

• The configuration data are valid only for the given configuration version (CNF version - see below).
If the new firmware version brings the new configuration version, the new configuration backup
file needs to be downloaded after the firmware upgrade.
Note
The actual unit configuration (inside the running unit) is converted to a new version auto-
matically during the firmware upgrade. No need to take care about that process.
Configuration version is stored in the parameter called “CNF version” which can be checked in the
menu: Diagnostics - Support - Advanced information.
Restore
The configuration can be restored from a backup file (containing the same configuration version
as the configuration version currently running in the unit - see above).
Choose File Button
Triggers the file selection dialog. Once the configuration backup file is selected, it is uploaded
to the unit. The upload action can take some time - depends on the speed of your service con-
nection to the unit.
Factory settings
Load default configuration button loads default values of all configuration parameters into
the web interface. All parameters whose current value differs from the default are marked as
changed. They are listed in the Changes to commit dialog. They do not affect the running unit
until eventually send to the unit by the Send configuration button.
Note
This action can be used (for example) to check which set of parameters differs from
the default value.
Restore configuration button
Enabled after the backup configuration is uploaded. Press the button to restore the unit config-
uration. The configuration restore result is reported as an error message (in case of failure) or
Notification centre success message:
Restore factory settings
Restores all configuration parameters to default setup (including monitoring settings)
Deletes user database (only default user "admin" with default password will remain). Logout from
station will apply.
Total purge
Restores all configuration parameters to default setup (including monitoring settings)
Deletes user database (only default user "admin" with default password will remain). Logout from
station will apply.
Deletes all diagnostic logs and statistics
M!DGE3 Cellular Router – © RACOM s.r.o. 132
Settings