RACOM M!DGE3, Руководство пользователя

Страница: 105 / 183

Defines the destination IP subnet.
Destination port (from) / Destination port (to)
Number {0 – 65535}, default = 0
Defines the range of values of destination port. Value 0 means, that it is not filtered according to
the destination port. These parameters occur only, if parameter “
Procotol ” is set to “UDP” or “TCP”.
Output Interface
List box {All; Radio; All ETH; AUX; GRE3; HotStandby; Other}, default = "All"
Filters selected interfaces.
Output interface name
Has to be set as one of existing interfaces (“radio”, the name of LAN (or VLAN) interface, the name
of GRE tunnel, etc.). This parameter occurs only, if parameter “
Output Interface ” is set to “Other”.
Range mapping
List box {Off; IP address to IP address}, default = "Off"
Off – Source address and (or) port will be replaced by values from parameters “ Rewrite source
IP ” and “ Rewrite source port ”. This applies only if those parameters are set (they are not set as
0.0.0.0).
IP range to IP range (NETMAP) – Rewriting the Range mapping of source IP address. New source
address will contain prefix from parameters “ Rewrite Source IP ” and “ Rewrite Source IP / Mask ”.
Rest of the source address will be filled by the original source address.
Rewrite source IP
IP address, default = 0.0.0.0/0
Defines a new source address. Value 0.0.0.0/0 means, that the source address is not changed.
Rewrite source port
Number {0 – 65535}, default = 0
Defines a new source port (rewriting multiple defined ports into one). Value 0 means, that the source
port is not changed.
Note
Informational note.
105 © RACOM s.r.o. – M!DGE3 Cellular Router
Settings