RACOM M!DGE3, Руководство пользователя

Страница: 97 / 183

Selects position of the specific AS ( Path AS ). "Any" – anywhere on the path. "Neighbor" – the path
was received from this AS (last on the path). "Source" – routing rule was originated from this AS
(first on the path).
Path AS
Number {0 – 2
32
-1}, default = 65000
The number of the AS searched for.
Action
List box {Accept; Reject; Pass}, default = "Accept"
Defines what action is taken on the captured [PP1] routing rule. "Pass" continues in processing.
Set preference
List box {Off; On}, default = "Off"
Defines if the specific
Preference will be set up for this rule.
Preference
Number {0 – 65535}, default = 100
Routing rule preference in the routing table. The higher the number the higher the preference.
Local preferred source address
IP address, default = 0.0.0.0
Preferred source IP address for the locally generated packets. When disabled (default value 0.0.0.0
is used), the source IP address is set according to the outgoing interface.
7.2.4.6. Export IGP filter
Export IGP filter rules. The order of rules matters. Maximum number of filter rules is 256.
Filter policy
List box {Accept; Reject}, default = "Reject"
Defines what action is taken on the routing rules which were not captured (i.e. fallback) in the
Export
IGP filter .
Active
List box {On; Off}, default = "On"
Enables / disables the filter rule.
Note
Informational note
Filter network
List box {Off; Match; Not match}, default = "Off"
Selects a method of the routing rule destination range comparison.
Network IP / Network mask
IP address, default = 0.0.0.0/0
IP address and mask defines the network prefix to be compared
Mask from
Number {0 – 32}, default = 0
Mask to
Number {0 – 32}, default = 32
97 © RACOM s.r.o. – M!DGE3 Cellular Router
Settings