RACOM M!DGE3, Руководство пользователя

Страница: 107 / 183

Source port (from) / Source port (to)
Number {0 – 65535}, default = 0
Defines the range of values of source port. Value 0 means, that it is not filtered according to the
source port. If only one port is required, set both parameters on the same number. These parameters
occur only, if parameter “
Procotol ” is set to “UDP” or “TCP”.
Destination IP / Mask
IP address, default = 0.0.0.0/0
Defines the destination IP subnet.
Destination port (from) / Destination port (to)
Defines the range of values of destination port. Value 0 means, that it is not filtered according to
the destination port. These parameters occur only, if parameter “
Procotol ” is set to “UDP” or “TCP”.
Output interface
List box {All; Radio; All ETH; AUX; GRE3; HotStandby; Other}, default = "All"
Filters selected interfaces.
Input interface name
Has to be set as one of existing interfaces (“radio”, the name of LAN (or VLAN) interface, the name
of GRE tunnel, etc.). This parameter occurs only, if parameter “
Input Interface ” is set to “Other”.
Range mapping
List box {Off; IP address to IP address}, default = "Off"
• Off – Destination address and (or) port will be replaced by values from parameters “ Rewrite
destination IP ” and “ Rewrite destination port ”. This will apply only if those parameters are set
(they are not set as 0.0.0.0).
• IP range to IP range (NETMAP) – Rewriting the Range mapping of source IP address. New
source address will contain prefix from parameters “ Rewrite Source IP ” and “ Rewrite Source
IP / Mask ”. Rest of the source address will be filled by the original source address.
• Port to IP address (PORTMAP): Range mapping of destination ports (parameters “ Destination
port from ”, “ Destination port to ”). New range mapping of destination ports origins in parameter
“ Rewrite destination IP ”. It can be additionally overwritten to parameter “ Rewrite destination
port ”.
107 © RACOM s.r.o. – M!DGE3 Cellular Router
Settings