RACOM M!DGE3, Руководство пользователя

Страница: 139 / 183

○ The SMS must contain a password to pass the authentication (parameter SMS password) .
○ The SMS must contain a valid format of a command .
• Only regular SMS are supported (Chained SMS are not).
• Some commands generate an automatic reply, which is sent to a defined phone number(s), if
this feature is enabled.
• If this parameter is disabled, all incoming SMS will be deleted.
SMS notifications EXT
{Enable; Disable}, default = "Disable"
Enables / Disables SMS commands for Cellular EXT.
When enabled, any change will generate a notification SMS, which will be sent from to all defined
phone numbers with active notification.
• To send an SMS notification to a phone number:
○ The specific phone number must be defined in parameter SMS numbers . If the phone number
is not defined, it will not receive any notification.
• Chained SMS are supported.
• Sending SMS notifications can be activated in Section 7.6.3, “Events” .
7.6.5.1. Parameters
SMS password
String {2–16 ASCII char}, default = "public"
Sets a SMS password, which serves as an authentication to send SMS from defined phone num-
ber(s). The range of length of the password is between 2–16 characters. SMS password must not
contain any unsupported characters. Unsupported characters are: ", `, \, $, ;.
7.6.5.2. SMS numbers
Phone number
{Enable; Disable}, default = "Enable"
Enables / Disables phone number. When enabled, defined phone number can either send or receive
(or both) SMS. Amount of phone numbers, which can receive and send SMS is limited to 10.
Note
Informational note
Allow commands
{On; Off}, default = "On"
Allows to accept commands from defined phone number.
Note
This parameter will work only if parameter SMS commands EXT is enabled.
Send notifications
{On; Off}, default = "On"
Allows to send notifications to defined phone number.
139 © RACOM s.r.o. – M!DGE3 Cellular Router
Settings