RACOM M!DGE3, Руководство пользователя

Страница: 88 / 183

Poll interval
Number {1 – 3600}, default = 20
Interval (in seconds) of sending Hello packets to inactive neighbors in the NMBA type of interface.
Retransmit interval
Number {1 – 3600}, default = 5
Interval (in seconds) of repeating unacknowledged packets.
Dead count
Number {2 – 64}, default = 4
Number of lost Hello packets from the neighbor to treat the connection as interrupted.
TTL security
List box {On; Off}, default = "On"
Protection against OSPF packets spoofing.
Authentication, Password
List box {None; Keyed MD5 (OSPFv2); HMAC SHA256; HMAC SHA384; HMAC SHA512}, default
= "None"
Selection of a method to authenticate the OSPF messages. Password is used as a secret key for
the selected hash function. Maximum length of the password is 128 characters.
Priority
Number {0 – 255}, default = 1
Priority is used to select primary or backup router responsible for the routing updates propagation.
The higher the number, the higher the priority. ‘0’ states the router cannot be used as a primary or
backup router.
Use broadcast
List box {On; Off}, default = "Off"
Defines if OSPF packets distribution is provided using multicasts (default behavior) or broadcasts
(nonstandard behavior).
Note
Informational note. It is possible to enter some descriptive OSPF interface name. This value is used
(when filled) instead of the original
Interface identification as an Interface name in other configur-
ation dialogs (e.g. Neighbors configuration).
7.2.3.5. Network - Areas and interfaces - Neighbors
Network neighbors of Point2Multipoint and NBMA types of OSPF interfaces are defined here. Maximum
number of neighbors is 512.
Active
List box {On; Off}, default = "Off"
Enables / disables the interface.
Interface
List box {list of existing OSPF interfaces}
OSPF interface the neighbor belongs to. The interface –
Note value is used when defined. The in-
terface – Interface value is used otherwise.
IP
IP address of the neighbor.
M!DGE3 Cellular Router – © RACOM s.r.o. 88
Settings