manualshive.com logo in svg

Racal Instruments 1256E, Руководство пользователя

Поделиться
Скачать
Racal Instruments 1256E Скачать руководство пользователя страница 2

THANK YOU FOR PURCHASING THIS RACAL INSTRUMENTS PRODUCT. 

For this product, or any other Racal Instruments product that incorporates software drivers, you may access 
our web site to verify and/or download the latest driver versions. The web address for driver downloads is: 

                                                  

http://www.racalinstruments.com/downloads

 

 

If you have any questions about software driver downloads or our privacy policy, please contact us at  

                                                       

[email protected]

 

 

WARRANTY STATEMENT 

All Racal Instruments, Inc. products are designed and manufactured to exacting standards and in full 
conformance to Racal’s ISO 9001:2000 processes. 

This warranty does not apply to defects resulting from any modification(s) of any product or part without Racal 
Instruments express written consent, or misuse of any product or part. The warranty also does not apply to 
fuses, software, non-rechargeable batteries, damage from battery leakage, or problems arising from normal 
wear, such as mechanical relay life, or failure to follow instructions. 

This warranty is in lieu of all other warranties, expressed or implied, including any implied warranty of 
merchantability or fitness for a particular use. The remedies provided herein are buyer’s sole and exclusive 
remedies. 

For the specific terms of your standard warranty, or optional extended warranty or service agreement, contact 
your Racal customer service advisor. Please have the following information available to facilitate service.  

1.  Product serial number 

2.  Product model number 

3.  Your company and contact information 

You may contact your customer service advisor by: 

E-Mail:   

 

[email protected]

 

Telephone: 

 

+1 800 722 3262 

 

(USA) 

  +44(0) 

8706 

080134 

 (UK) 

 

Fax: 

 

 

+1 949 859 7309 

 

(USA) 

  +44(0) 

1628 

662017 

 (UK) 

 

Содержание 1256E













































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды