40
TD-000472-00-B
Output Channel – Limiter
The Limiter keeps the audio level from going above the set Threshold.
Home
Select the
Aux Bank
Touch a
Select Button
Select
Limiter Tab
Limiter
Aux Outputs
Aux 1
Main
or
Refer to
— Figure 34
1.
Limiter Tab
– Selects the Limiter screen
2.
In
– RMS input level
3.
Out
– Output level
4.
NR
– Gain Reduction – indicates how much the signal is being reduced by the Limiter.
5.
Limiter Nraph
– When the Limiter is engaged, the trace is blue.
• Threshold (A)
• Ratio (B)
• Attack time (A to B)
• Release time (B to C)
• Vertical scale = dB
6.
Threshold Slider
– Sets the point at which the Limiter will begin to reduce signal level.
7.
Ratio Slider
– Sets the ratio of input level to output level when the signal exceeds the
threshold.
8.
Attack Slider
– Adjusts how quickly the Limiter reacts to a signal that exceeds
the threshold.
9.
Release Slider
– Adjusts how quickly the Limiter stops Limiting when signal falls below the Threshold.
10.
Limiter In Button
– Engages or disengages the limiter.
11.
Knee In Button
– Engages or disengages the Knee. The Knee provides a smoother transition from the Attack to the Release.
— Figure 34
shows
the knee engaged.
12.
Simple Button
– Turns the Simple mode on and off. Hides all controls except:
• Limiter In button
• Simple button
• Reset button
• Limiting (Threshold) knob
13.
Reset Button
– Sets all the Limiter controls to their factory default position.
— Figure 34 —
6
7
8
9
10
11
12
13
1
2
3
4
5
A
C
B
