33
TD-000472-00-B
Input Channel – Nate
The Gate passes audio above a set Threshold, and attenuates or silences audio below the Threshold.
Refer to
— Figure 22
–
1.
Nate Tab
– Selects the Gate Screen.
2.
In
– RMS input level
3.
Out
– Output level
4.
NR
– Gain Reduction – indicates how much the signal is being reduced by the Gate.
5.
Threshold Slider
– Sets the point at which the Gate allows audio to pass.
6.
Nate Nraph
– When the Gate is engaged, the trace turns green.
• Threshold (A)
• Attack time (A-B)
• Release time (C-D)
• Attenuation Level (E).
7.
Attack Slider
– Adjusts how quickly the gate reacts to a signal that exceeds the
threshold.
8.
Nate In Button
– Engages or disengages the Gate.
9.
Hold Knob
– Sets the minimum time the Gate stays open once it is opened, and the length of time the Gate stays open after the input level drops
below the Threshold.
10.
Release Slider
– Adjusts how quickly the Gate attenuates the audio when signal falls below threshold.
11.
Simple Button
– Turns Simple mode on and off. Hides all controls except:
• Gate In button
• Simple button
• Reset button
• Gating knob
12.
Reset Button
– Sets all the Gate controls to their factory default position.
13.
Attenuation Slider
– Sets the amount of attenuation applied to the output when the signal is below the Threshold.
Home
Select an
Input Bank
Touch Select
Button
Select
Gate Tab
Gate
In 2
Inputs 1-8
— Figure 22 —
2
3
4
5
6
1
7
8
9
13
10
11
12
A B
D
C
E
