Qiagen Rotor-Gene Q MDx CE Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 208

Qiagen Rotor-Gene Q MDx CE Скачать руководство пользователя страница 15

Rotor-Gene Q MDx CE User Manual 02/2022

15

CAUTION

Risk of material damage

Visually inspect and make sure the rotor is not damaged or deformed before
each run.

If you touch the Rotor-Gene Q MDx during an experiment, while you are charged with static
electricity, in severe cases the Rotor-Gene Q MDx may reset. However, the software will restart the
Rotor-Gene Q MDx and continue the experiment.

2.2

Electrical safety

Disconnect the line power cord from the power outlet before servicing.

WARNING

Electrical hazard

Any interruption of the protective conductor (earth/ground lead) inside or
outside the instrument or disconnection of the protective conductor terminal is
likely to make the instrument dangerous.

Intentional interruption is prohibited.

Lethal voltages inside the instrument

When the instrument is connected to line power, terminals may be live and
opening covers or removing parts is likely to expose live parts.

To ensure satisfactory and safe operation of the Rotor-Gene Q MDx, follow the advice below:



The line power cord must be connected to a line power outlet that has a protective conductor
(earth/ground).



Do not adjust or replace internal parts of the instrument.



Do not operate the instrument with any covers or parts removed.



If liquid has spilled inside the instrument, switch off the instrument, disconnect it from the
power outlet, and contact QIAGEN Technical Services.

If the instrument becomes electrically unsafe, prevent other personnel from operating it, and contact
QIAGEN Technical Services.

«
...
13
14
15
16
17
...
»

Содержание Rotor-Gene Q MDx CE

















































































































































































































Отзывы:

Нет отзывов