PURSUIT 3000 EXPRESS, Руководство пользователя

Страница: 57 / 160

3000 EXPRESS
NEVER USE AN OPEN FLAME IN THE BATTERY STORAGE AREA. AVOID
STRIKING SPARKS NEAR THE BATTERY. A BATTERY CAN EXPLODE IF
A FLAME OR SPARK IGNITES THE HYDROGEN GAS THE BATTERY EMITS
WHILE BEING CHARGED.
AC Electrical System Maintenance
Periodically inspect all wiring for nicks, chafing, brittleness, improper support, etc. Examine the
shore power cord closely for cracks in the insulation and corrosion in electrical connectors.
Spraying receptacles and electrical connections with an electrical contact cleaner or a metal and
electrical protector will reduce corrosion and improve electrical continuity.
Inspect all wiring for proper support, sound insulation, and tight terminals, paying particular
attention to portable appliance cords and plugs.
The entire AC circuitry, especially the shore power cord, should be seasonally tested for proper
continuity by an experienced electrician. This will detect any shorts, open wires, or ground faults.
Ground fault interrupters should be tested periodically to ensure proper operation by pressing the
test/reset buttons in the center of face plate. The polarity indicator system also should be
inspected for proper operation.
The engine maintenance required on the generator is similar in many ways to the main engines.
The most important factors to the generator's longevity are proper ventilation, maintenance of
the fuel system, ignition system, cooling system, lubrication system and the AC alternator.
Maintenance schedules and procedures are outlined in your generator owner’s manual. They
should be followed exactly.
CORROSION ALLOWED TO BUILD ON THE ELECTRICAL CONNECTORS CAN
CAUSE A POOR CONNECTION RESULTING IN SHORTS, GROUND FAULTS OR
POOR GROUND CONNECTIONS. ELECTRICAL CONNECTORS SHOULD BE
CHECKED AT LEAST ANNUALLY AND CLEANED AS REQUIRED. DO NOT ALLOW
CORROSION TO BUILD ON CONNECTIONS.
THE AC AND DC ELECTRICAL SYSTEMS ALWAYS SHOULD BE DISCONNECTED
FROM THE POWER SOURCE BEFORE INSPECTING OR SERVICING THE SYSTEM.
NEVER SERVICE ANY COMPONENT OF AN ELECTRICAL SYSTEM WHILE IT IS
ENERGIZED.
4-15