PURSUIT 3000 EXPRESS, Руководство пользователя

Страница: 52 / 160

3000 EXPRESS
4-10
Turn the dock side disconnect switch or circuit breaker to the “ON” position and check for proper
polarity. If reverse polarity has been achieved, the red polarity indicator in the AC panel will light.
If this should happen, make sure the main breaker on the panel is in the “OFF” position and turn
the dock power switch or breaker off. A special relay attached to the main breaker should
automatically turn the main breaker off whenever reverse polarity is achieved. Notify a qualified
electrician to check the wiring at the dock outlet. If the red polarity light does not illuminate when
power is supplied to the panel, the polarity is correct and the AC main switch can be moved to
the “ON” position.
DO NOT OPERATE THE AC ELECTRICAL SYSTEM FROM SHORE POWER WITH
REVERSE POLARITY. REVERSE POLARITY WILL DAMAGE THE SYSTEM AND
EXPOSE PASSENGERS TO ELECTROCUTION HAZARDS. THIS CONDITION COULD
ALSO CAUSE A FIRE IN THE ELECTRICAL SYSTEM.
DO NOT ATTEMPT TO CORRECT THE WIRING YOURSELF. ELECTRIC SHOCK
CAN CAUSE SEVERE INJURY OR EVEN DEATH. ALWAYS HAVE A QUALIFIED
ELECTRICIAN CHECK WIRING.
KEEP CHILDREN AWAY FROM ANY ELECTRICAL CABLES OR EQUIPMENT AND
ALWAYS USE GROUNDED APPLIANCES ON BOARD YOUR BOAT.
UNDETECTED FAULTS IN THE AC ELECTRICAL SYSTEM COULD CAUSE THE
WATER AROUND THE BOAT TO BECOME ENERGIZED. THIS COULD CAUSE A
SEVERE SHOCK OR EVEN DEATH TO SOMEONE IN THE WATER NEAR THE
BOAT. NEVER SWIM OR ALLOW SWIMMING AROUND THE BOAT WHEN THE
AC SYSTEM IS ACTIVATED BY THE GENERATOR OR THE SHORE POWER CON-
NECTION.
Disconnecting procedure for shore power connection
Turn the main breaker on the AC panel and the disconnect switch on the dock side outlet to the
“OFF” position.
Disconnect the cable from the dock side outlet and replace the outlet caps. Disconnect the cable
from the boat and close the inlet cap. Store cable.