PURSUIT 3000 EXPRESS, Руководство пользователя

Страница: 120 / 160

3000 EXPRESS
Lifting
It is essential that care be used when lifting your boat. Make sure the spreader bar at each sling
is at least as long as the distance across the widest point of the boat that the sling will surround.
Put the slings in position. Refer to the drawing above for the correct position of the lifting slings.
The fore and aft slings should be tied together to prevent the slings from sliding on the hull.
The bow should be slightly higher than the stern while lifting the boat. This will allow the water
to drain from the engine exhaust system and prevent water from surging over the risers and into
the engine.
BOATS CAN BE DAMAGED FROM IMPROPER LIFTING AND ROUGH HANDLING
WHEN BEING TRANSPORTED BY LIFT TRUCKS. CARE AND PROPER HANDLING
PROCEDURES MUST BE USED WHEN USING A LIFT TRUCK TO MOVE THE
BOAT. NEVER ATTEMPT TO LIFT THE BOAT WITH A SUBSTANTIAL AMOUNT
OF WATER IN THE BILGE.
SEVERE GELCOAT CRACKING OR MORE SERIOUS HULL DAMAGE CAN OCCUR
DURING HAULING AND LAUNCHING IF PRESSURE IS CREATED ON THE GUN-
WALES (SHEER) BY THE SLINGS. FLAT, WIDE SLINGS AND SPREADERS LONG
ENOUGH TO KEEP PRESSURE FROM THE GUNWALES IS ESSENTIAL. DO NOT
ALLOW ANYONE TO HAUL YOUR BOAT WHEN THE SPREADERS ON THE LIFT
ARE NOT WIDE ENOUGH TO TAKE THE PRESSURE OFF THE GUNWALES.
14-2
Sling locations
NOTICE
NOTICE