PURSUIT 3000 EXPRESS, Руководство пользователя

Страница: 18 / 160

3000 EXPRESS
1.2 Drive Systems
On inboard propulsion systems, all shifting and gearing components are installed inside the hull.
Only the propeller shafts and associated equipment are under water. The engines are mounted
below the bridge deck sole. A transmission, also called a gearbox, which performs desired
shifting functions, is directly coupled to each engine. The propeller shaft extends through the
hull and connects the transmission output coupling with the propeller. Some inboard transmis-
sions have built-in reduction gearing. This gearing reduces the speed of the propeller in relation
to engine speed.
ALWAYS RETURN THE ENGINE THROTTLE LEVERS TO THE EXTREME LOW
SPEED POSITION BEFORE SHIFTING. NEVER SHIFT THE UNIT WHILE THE EN-
GINE SPEED IS ABOVE 1000 RPM.
All transmissions require oil or fluid of some type for lubrication. This level should be checked
at the same interval as the engine oil level.
Your boat is equipped with transmissions supplied by the engine manufacturer. For details on
the transmissions, refer to the engine or transmission owner's manual.
1.3 Engine Exhaust System
Engine exhaust exits the rear of the boat through the exhaust system. The system consists of
engine exhaust manifolds, exhaust hoses, mufflers, and thru-hull exhaust fittings.
1-2
Inboard Drive System