When an error message is displayed (Error code list)
Maintenance/Troubleshooting
1-99
Security Settings
Sound Settings
Failed to read because the
target file has a different for-
mat.
Couldn’t read because the target file is
damaged or it has a different format.
Check the read-from file and read it again.
)
GP-Pro EX Refer-
ence Manual “25.3
Creating CSV Data
Recipes” (page 25-
9)
Failed to read the target file.
Couldn’t read because the target file is
damaged or in use. Check the file and
read it again.
Failed to write to the target
file.
Check the export destination file or
disk and write to it again.
Error Message
Cause and Solution
Reference
The password already exists.
Please change your pass-
word.
You cannot specify the same password
on multiple levels. Change the pass-
word.
)
GP-Pro EX Refer-
ence Manual “22.5
Common [Security
Settings] Settings
Guide” (page 22-9)
You have selected the Use
Level 15 Password to Go
Offline option. Please set the
level 15 password.
Please set the level 15 password.
Error Message
Cause and Solution
Reference
Cannot paste because the
paste-to range does not
match the copied range.
Specify the paste-to range with N times
(N is 1 or larger integer) the size of the
copied range.
—
Beyond the address setting
range. Allotment exceeding
∗∗∗
is not allowed.
Specify an address supported by the
device/PLC.
Failed to read the specified
file.
Check the target file and read it again.
Failed to create the specified
file after conversion.
Check the target file and output it
again.
Failed to read the specified
file because its format is not
supported.
Convert the file into a supported for-
mat and read it again.
)
GP-Pro EX Refer-
ence Manual “26.5.1
Common [Sound]
Settings Guide”
(page 26-13)
Cannot edit the sound data
because it does not exist.
Verify that there exists data inside the
CF-card Output Folder.
)
GP-Pro EX Refer-
ence Manual “5.7.2
Setup Procedure n
Setting the Desti-
nation folder” (page
5-43)
Error Message
Cause and Solution
Reference
