Pro-face GP3000 Series, Техническое обслуживание и устранение неисправностей

Страница: 106 / 164

When an error message is displayed (Error code list)
Maintenance/Troubleshooting
1-106
1008 Sound Set-
tings
Sound data cannot
be used with the
selected display
unit. Please remove
the sound data from
the project.
Delete sound data.
)
GP-Pro EX Refer-
ence Manual “1.3
List of Supported
Functions by
Device” (page 1-
5)
1009 VM Unit
Window
Settings
The video module
cannot be used with
the selected dis-
play unit. Please
remove this mod-
ule from the project. Delete the VM Unit Window.
1010
—
Up to 1000 vari-
ables can be used
with the selected
display. Please
check the settings
in the Symbol Vari-
able list. Delete excess variables so that
the number of variables does
not exceed 1000 items.
)
GP-Pro EX Refer-
ence Manual
“5.14.8 [Common
Settings] Setting
Guide n Symbol
Variable Settings”
(page 5-158)
1011 Main Unit
Settings Remote PC Access
Key Code has not
been set up.
Specify a key code in [Remote
PC Access Key Code] of
[Main Unit Settings] -
[Extended Settings] in the
System Settings window.
)
GP-Pro EX Refer-
ence Manual
“5.14.6 [System
Settings] Setting
Guide u
Extended Set-
tings” (page 5-
137)
1500 Project
Information
The transmission
data size exceeds
the maximum limit.
Check your set-
tings.
Set the User Screen Area
within the following memory
ranges for each model.
GP-3300 Series (6 MB)
GP-3400 Series to GP-3700
Series (8 MB)
IPC Series (16 MB)
(There is a chance that 90% or
more of the memory will
cause an error output because
of the data structure.)
)
GP-Pro EX Refer-
ence Manual “6.4
[Font] Settings
Guide” (page 6-
19)
1501
—
∗∗∗
Illegal address.
Define a correct
address.
Input an address for the speci-
fied location address with a
keypad.
(
∗∗∗
indicates where the prob-
lem is located such as the
function of the common set-
tings or “Base screen 1” or
other screen name.)
)
GP-Pro EX Refer-
ence Manual
“14.2.2 Setup Pro-
cedure” (page 14-
6)
1502 Symbol
Variable
Settings
There is a symbol
without a device
address. Check the
symbols in the
Symbol Settings.
Delete the parts using a sym-
bol for the address settings or
with no address settings, or set
the address to parts with no
address settings.
)
GP-Pro EX Refer-
ence Manual
“5.9.2 Setup Pro-
cedure” (page 5-
50)
Continued
Error
No.
Screen
ID/No./Line
Error Message Handling method Reference