Power Electronics SDRIVE 700 Series, Руководство по началу работы

Страница: 74 / 130

POWER ELECTRONICS
SDRIVE 700
DESCRIPTION OF PROGRAMMING PARAMETERS
73
10.13. Group 13 – G13: Fault History
Parameter
Name /
Description
Range
Default
value
Function
Set on
RUN
1 F0 NO FAULT
LAST FAULT=FXX
G13.1 / Screen
for GENERAL
FAULT - -
Displays last fault information. Drive shows this screen in the case
of a trip.
Pressing
∗
key approx two seconds provides access to the
extended information that shows the order of fault: LAST
FAULT=Fxx (when fault is reset).
The equipment is reset by pressing the STOP-RESET key from
display or by using an external reset (if connected). Several faults
can be reset automatically using Auto Reset (See group G12).
-
2 F0 NO FAULT
FIFTH FAULT=FXX
G13.2 / Register
1 of fault history
- -
3 F0 NO FAULT
FOURTH FAULT=FXX
G13.3 / Register
2 of fault history
- -
4 F0 NO FAULT
THIRD FAULT=FXX
G13.4 / Register
3 of fault history
- -
5 F0 NO FAULT
SECOND FAULT=FXX
G13.5 / Register
4 of fault history
- -
6 F0 NO FAULT
FIRST FAULT=FXX
G13.6 / Register
5 of fault history
- -
Register of last five faults.
It shows a list of the last five faults in chronological order. The most
recent fault appears in first place (G13.2). Each time that a fault
occurs the drive shows the fault in general screen (G13.1). After the
fault is solved and reset, this fault will be shifted to the first position
of fault register (G13.2). The previous faults will shift down one
position. The oldest fault message (G13.6) will be lost.
Pressing
∗
key approx two seconds provides access to the
extended information that shows the order of fault:
FIFTH FAULT=Fxx up to FIRST FAULT=Fxx
The following table shows all the faults:
COD FAULT COD FAULT
0 F0 NO FAULT 33 F33 SCR L3
1 F1 I LIM FLT 34 F34 IGBT TEMP
2 F2 V LIM FLT 35 F35 PHSE L1 LOSS
3 F3 PDINT FLT 36 F36 PHSE L2 LOSS
4 F4 U+DESAT 37 F37 PHSE L3 LOSS
5 F5 U-DESAT 40 F40 EXT / PTC
6 F6 V+DESAT 41 F41 COMMS TRIP
7 F7 V-DESAT 42 F42 AIN1 LOSS
8 F8 W+DESAT 43 F43 AIN2 LOSS
9 F9 W-DESAT 44 F44 CAL FLT
10 F10 NEG DESAT 45 F45 STOP T/O
11 F11 VIN LOSS 46 F46 EEPROM FLT
12 F12 IMB V IN 47 F47 COMMS T/O
13 F13 HI V IN 48 F48 SPI COM
14 F14 LW V IN 49 F49 SPD LIMIT
15 F15 CURL Vdc 50 F50 PSU FAULT
16 F16 HI Vdc 51 F51 SCR TEMP
17 F17 LW Vdc 52 F52 SUPPLY FAN
18 F18 IMB V OUT 53 F53 INTRNAL TEMP
19 F19 IMB I OUT 54
F54 WATCHDOG
TMR
20 F20 GROUND FLT 56
F56
EMERGEN.STOP
21 F21 I LIM T/O 57
F57 PUMP
OVERLOA
22 F22 TQ LIM T/O 65
F65 LOW
PRESSURE
25 F25 MTR O/L 66 F66 HI PRESSURE
27 F27 DL SMTH 67 F67 LOW WATER
28 F28 MICRO FLT 68 F68 CAVIT/UNDERL
29 F29 DSP FLT 69 F69 FLOW SWITCH
30 F30 WATCHDOG 70 F70 IRRIGATOR FL
31 F31 SCR L1 71 F71 CYCLING
32 F32 SCR L2 72 F72 IN PRES SW
-
7 CLEAR FAULTS=N G13.7
/ Erase
fault history
N
Y
N
OPT FUNCTION
N=NO Function disabled.
Y=YES
It erases fault history (last five faults). The screen
returns to default value ‘NO’, after all the faults
have been erased.
YES