Power Electronics SDRIVE 700 Series, Руководство по началу работы

Страница: 35 / 130

SDRIVE 700
POWER ELECTRONICS
34
CONNECTION TERMINALS
6.3. Control Terminals Description
PIN SIGNAL DESCRIPTION
1 +24V_USR
Power supply for digital inputs. Short circuit and overload protected. (M24Vdc,
180mA)
2 DI1
Programmable D igital I nput 1 . Digital inputs are configured in the Input group. Their status can
be displayed in the visualisation group. They can be supplied from terminal 1 or an external
power 24Vdc supply. If an external power supply is used, the common should be connected to
the terminal 19 (user GND).
3 DI2 Programmable D igital I nput 2 . See DI1 description.
4 DI3 Programmable D igital I nput 3 . See DI1 description.
5 DI4 Programmable D igital I nput 4 . See DI1 description.
6 DI5 Programmable D igital I nput 5 . See DI1 description.
7 DI6 Programmable D igital I nput 6 . See DI1 description.
8 PTC +
DIGITAL INPUTS
9 PTC -
Dedicated input for the connection of an embedded PTC in the motor. A protective trip will occur
if the resistance moves outside the range of 85
Ω
and 2k
Ω
.
10 AI1 +
Voltage or current programmable A nalogue I nput 1 (V or mA). Configurable for 0-10Vdc,
±10Vdc, 0-20mA or 4-20mA.
Input resistance value in voltage mode is Ri=20k
Ω
. Input resistance value in current mode is
Ri=250
Ω
.
11 AI1 - Common for Analogue Input 1.
12 AI2 + Voltage or current programmable A nalogue I nput 2 (V or mA). See AI1 description.
ANALOGUE
INPUTS
13 AI2 - Common for Analogue Input 2.
14 AO1 +
Voltage or current programmable A nalogue O utput 1 (V or mA). Configurable for 0-10Vdc,
±10Vdc, 0-20mA or 4-20mA.
15 AO1 - Common for Analogue Output 1.
16 AO2 +
Voltage or current programmable A nalogue O utput 2 (V or mA). Configurable for 0-10Vdc,
±10Vdc, 0-20mA or 4-20mA.
ANALOGUE
OUTPUTS
17 AO2 - Common for Analogue Output 2.
18 +10V_POT 10Vdc power supply for analogue inputs. Input power for maximum 2 potentiometers (R
≥
1k
Ω
).
19 GND_USR Common for analogue inputs (0Vdc).
USER POWER
SUPPLY
20 +24V_USR User power supply. Allows for the supply to an external sensor. (Maximum: +24Vdc, 150mA).
21 RS485 A
22 RS485 B
RS485 serial communication interface for Modbus.
23
RS
Common
Common for RS485 / RS232 serial communication signals.
24 RS232 Rx
X1 CONNECT
OR
SERIAL
COMMUNICA
TION
25 RS232 Tx
RS232 serial communication interface for Modbus.
26 Relay1 NO
27 Relay1 C
28 Relay1 NC
D igital O utput 1 . Programmable change over relay (NO / NC). Potential free (Maximum:
250Vac, 8A; 30Vdc, 8A).
29 Relay2 NO
30 Relay2 C
31 Relay2 NC
D igital O utput 2 . Programmable change over relay (NO / NC). Potential free (Maximum:
250Vac, 8A; 30Vdc, 8A).
32 Relay3 NO
33 Relay3 C
X2 CONNECT
OR
DIGITAL OUT
P
UTS
34 Relay3 NC
D igital O utput 3 . Programmable change over relay (NO / NC). Potential free (Maximum:
250Vac, 8A; 30Vdc, 8A).