11 Upgrades
222
Option C72
You enable this feature upgrade for Maternal pulse capability using the Support Tool. Refer to the
Support Tool Instructions for Use for details of the upgrade procedure.
Option C73
You enable this feature upgrade to triplets capability using the Support Tool. Refer to the
Support Tool
Instructions for Use
for details of the upgrade procedure.
Option CL2
You enable this feature upgrade for the cableless maternal measurements (IntelliVue CL NBP and
CL SpO
2
) capability using the Support Tool. Refer to the Support Tool Instructions for Use for details
of the upgrade procedure.
All J.x Options
The interfaces require no special upgrade procedures as they are "plug and play" boards. For settings
defining a special combination of the boards see the Configuration Guide.
SJ3
You can upgrade the monitor software to Rel. J.3 or higher using the Support Tool see “Software and
Firmware Upgrades” on page 222.
The internal back-up memory is now able to store traces and data from at least the last 3.5 hours with
the software revision J.3, and minimum 7 hours with the new main board hardware revision A 00.18
Software and Firmware Upgrades
The software of the monitor and the firmware of the transducers and other system components can be
upgraded by a software download from a PC running the Support Tool. You connect the monitor to
the PC via a LAN connection. You need:
•
Industry standard PC
•
Support Tool
•
LAN / RS232 system interface
•
LAN interface cable for the Support Tool
Several Avalon fetal monitors can be upgraded in parallel with the Support Tool. All monitors in an
installation can be upgraded at once, if desired.
The transducers can be upgraded one at a time, even though more than one may be plugged into the
monitor at the same time.
When upgrading to a new monitor software revision, we recommend that you check that all system
hardware components have the latest firmware revision, and upgrade these if necessary.
Refer to the
Support Tool Instructions for Use
for details of the upgrade procedure. Contact Philips
Support for further details.
For tests to perform after upgrading, see “When to Perform Tests” on page 56.
Содержание Avalon FM20
