6. Messages and Troubleshooting
6-2
April 2003
8799-A2-GB20-10
Configuring SNMP Traps
An SNMP trap can be automatically sent out through the EOC, the Management
port, or the Inband Management Channel (if enabled) to the SNMP manager when
the line card detects conditions set by the user. These traps enable the SNMP
manager to gauge the state of the network. Refer to
Appendix B,
Standards
Compliance for SNMP Traps
,
for details of SNMP traps supported by the card.
To configure the card for SNMP traps, use the SNMP Traps Options screen to:
Enable SNMP traps.
Select the type of SNMP traps to be sent from the card.
To configure SNMP Traps, follow this menu selection sequence:
Main Menu
→
Configuration
→
Current Configuration
→
Management and Communication
→
SNMP Traps
Refer to
Table A-12, SNMP Trap Options,
in Appendix A,
Configuration Options
to
configure SNMP traps.
main/config/management/trap Hotwire
Slot: 4 Model: 8799
SNMP TRAPS OPTIONS
SNMP Traps: Enable
General Traps: Both Enterprise Specific Traps: Disable
Link Traps: Both Link Traps Interfaces: All
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save
Содержание Hotwire 8799
