Panasonic SC-HG1-C Скачать руководство пользователя страница 33

Страница: 33 / 128

Installation and Settings

WUME-SCHG1C-4

3-11

■

Procedure for connecting to the CC-Link connector

Insert the stranded wire (lead wire) in the ferrule (sleeve) terminal fully into the connection hole

in the CC-Link connector.
When inserted correctly, the wire is locked and cannot be pulled out. Take care not to pull with

excessive force, as the wire may break.

Stranded wire (lead wire)

Ferrule (sleeve) terminal

Lead wire insertion hole

To connect stranded wire (lead wire) to the CC-Link connector without using a ferrule (sleeve)

terminal, insert fully into the connection hole while pressing the release button.

Stranded wire (lead wire)

Flat-head screwdriver

Release button

Procedure for removing from the CC-Link connector
To disconnect the stranded (lead) wire, pull out the wire while pressing the release button.

Flat-head screwdriver

Release button

Connecting the CC-Link connector to the product

When attaching the CC-Link connector to the product, tighten to a torque of no more than 0.2N∙m.

CC-Link connector

This product

Mounting screw

Содержание SC-HG1-C

































































































































Результаты поиска

Содержание SC-HG1-C

Отзывы:

Panasonic SC-HG1-C, Руководство пользователя, Страница: 33 / 128

Результаты поиска

Содержание SC-HG1-C

Отзывы: