Panasonic SC-HG1-C Скачать руководство пользователя страница 113

Страница: 113 / 128

Warranty

WUME-SCHG1C-4

6-3

[Scope of warranty]

●

If a failure or defect for which our company is responsible is discovered during the warranty

period, our company will provide a substitute product or required replacement parts free of

charge, or will replace or repair the defective part free of charge at the location where the

product was purchased or delivered.

Failures and defects to which any of the following apply are excluded.

(1) The problem originated in the customer's specifications, standards, or handling proce-

dures.

(2) The problem originated in structural, performance, specification, or other modifications

made by the customer after purchase or delivery without our approval.

(3) The problem was caused by a phenomenon not foreseeable by technology in practical

application at the time of purchase or contract.

(4) The product was used outside of the condition / environment ranges indicated in the cata-

log and specifications.

(5) When our product was incorporated and used in the customer's equipment, damages oc-

curred that could have been avoided if the customer's equipment had a structure, func-

tions, or other features commonly accepted in the industry.

(6) The problem was caused by a natural disaster or other Act of God.

"Warranty" as used here is limited to the product itself that was purchased or delivered. Dam-

ages caused by a failure or defect in our product are excluded.

[Scope of service]

●

Expenses for service such as dispatching a technician are not included in the product price.

If you are interested in service, please consult with a sales representative

The above applies to purchases and use in Japan.

For questions and information on specifications, warranties, and service related to purchases

and use in regions other than Japan, please consult a representative.

Содержание SC-HG1-C

































































































































Результаты поиска

Содержание SC-HG1-C

Отзывы:

Panasonic SC-HG1-C, Руководство пользователя, Страница: 113 / 128

Результаты поиска

Содержание SC-HG1-C

Отзывы: