No. SX-DSV03224-5-
R6.0
Motion Control Business Unit, Panasonic Corporation
4. General specifications
Item
Description
Input
power
supply
100 V
Main circuit power supply
Single phase 100 - 120 V
＋
10 %
-15 %
50/60 Hz
Control circuit power
supply
Single phase 100 - 120 V
＋
10 %
-15 %
50/60 Hz
200 V
Main circuit power
supply
A-D
Single/3 phase 200 - 240 V
＋
10 %
-15 %
50/60 Hz
E-H
3 phase 200 - 240 V
＋
10 %
-15 %
50/60 Hz
Control circuit
power supply
A-D
Single phase 200 - 240 V
＋
10 %
-15 %
50/60 Hz
E-H
Single phase 200 - 240 V
＋
10 %
-15 %
50/60 Hz
400 V
Main circuit power supply
3-phase 380Y/220-480Y/277 V
TN (Ground the neutral point)
+10 %
-15 %
50/60 Hz
Control circuit power
supply
DC 24 V
±15 %
Operation
conditions
Temperature
Operation temperature: 0-55 degrees C (without freezing)
Storage temperature: -20-65 degrees C
(Max.temperature guarantee : 80 degrees C for 72 hours without dew condensation *1)
Humidity
Operation / storage humidity: 20-85 %RH or less (without condensation*1)
Altitude
1,000 m above sea level or less
Vibration
5.88 m/s
2
or less, 10-60 Hz
pollution degree
pollution degree 2 or 1
Insulation voltage
Withstanding 1,500 VAC between the primary and grounding lines for one minute.
Control method
IGBT PWM method, sinusoidal drive
CS signal feedback
CS signal input (CS1, CS2, CS3) Compatible with TTL level input
Scale feedback
A/B phase, homing signal defferential input type
Panasonic supported serial communication type *2
Control signal
Input
Each 8 input can be assigned by the parameter
Output
Each 3 output can be assigned by the parameter
Analog signal
Output
2 x output ports for analog monitor
Pulse signal
Output
2 x output ports
Line driver output for feedback scale pulses (A/B signal)
Communication
Realtime Express
(RTEX)
Interface for motion control.
USB
USB interface to connect to computers for parameter setting or status monitoring.
USB cable and wireless LAN dongle connection possible *3
Safety terminal *4
Connector to support functional safety
Front panel
①
2-digit rotary switch
②
2-digit 7-segment LED, 2 x LED for status indication
③
Analog monitor connector
Regeneration
Sizes A,B,G,H: Without built-in regenerative resistor (use external mounting)
Sizes C to F: With built-in regenerative resistor (External regenerative resistor is also available)
Dynamic brake
Size A - G: Built-in
Size H : Extercal only
Control mode
Position control: Profile position mode (PP), cyclic position mode (CP)
Velocity control: cyclic velocity mode (CV)
Torque control: cyclic torque mode (CT)
PP/CP/CV/CT modes are switchable each other with commands through RTEX.
*1 Please note that condensation tend to occur when temperature fall.
*2 Please refer to the collaboration catalog for the corresponding scale maker and part number.
*3 Do not use wireless LAN dongle outside the usable regions because it becomes a violation of laws and regulations.
For details of functions and available regions, please check our website
*4 It can not be used for standard type
For details of each specification, refer to Technical Reference - Functional Specification
