Panasonic AFP7MC16EC, Руководство пользователя

Страница: 240 / 504

Automatic Operation (Synchronous Control)
9-48
The cam pattern rewriting results are as follows.
Axis
no.
Unit
memory
no. (Hex)
Name Default Unit Setting range and description
- UM 66F99
Cam
pattern
rewriting
result
0000H -
The result of rewriting processing (response code) is stored.
Code Name Description Countermeasures
0000H Normal end - -
FF01H Cam pattern
no. Setup error The cam pattern
setting value is out of
the settable range.
FF02H Number of
cam pattern
setting
sections
setting error The set
number of cam
pattern setting
sections is out
of the settable
range. Check the set
number of setting
sections.
FF03H Shift amount
setting error The set shift
amount is out
of the settable
range. Check the set value
of the shift amount.
FF04H - - -
FF05H Start phase
setting error
1 The set start
phase is out of
the settable
range. Check the set value
of the start phase in
each section.
FF06H Start phase
setting error
2 The set start
phase is the
same as or
smaller than
the start phase
of the previous
section. Check if the relation
between the start
phases of each
section is (Start
phase of section n-1)
< (Start phase of
section n).
FF07H Start phase
setting error
3 The set start
phase of the
section 1 is not
0. Always set the start
phase of the section
1 to 0.
FF08H-
FF09H - - -
FF0AH Displacement
setting error The set value
of the
displacement is
out of the
settable range. Check the set value
of the phase in each
section.
FF0BH Cam curve
no. Setup error The set cam curve
number is out of the
settable range.
FF10H Cam pattern
reading not
executable
error 1 An axis in
synchronous
operation
exists. Cancel the
synchronous
operation and
execute the reading.
FF11H Cam pattern
reading not
executable
error 2 An operating
axis exists. Execute the reading
when no operating
axis exists.
FF20H Cam pattern
rewriting not
executable
error 1 An axis in
synchronous
operation
exists. Cancel the
synchronous
operation and
execute the rewriting.
FF21H Cam pattern
rewriting not
executable
error 2 An operating
axis exists. Execute the rewriting
when no operating
axis exists.
FF22H Cam pattern
rewriting not
executable
error 3 The reading
request and
rewriting
request turned
on
simultaneously. Check if the reading
request and rewriting
request do not turn
on simultaneously.