Panasonic AFP7MC16EC, Руководство пользователя

Страница: 437 / 504

16.5 Unit Memories (Common Area)
16-41
16.5.7 Actual Speed Monitor Area
● :
Available, -: Not available
Axis no.
Unit
memory
no. (Hex)
Name Default Description R W
1
UM 00770
-UM 00771
Actual speed
monitor value
[2 words]
U0
The actual speed monitor value is stored.

For command unit/s, the ranges vary
depending on the unit settings as below
pulse: 0 to 2,147,483,647 pps
μm: 0 to 2,147,483,647 μm/s
inch: 0 to 2,147,483.647 inch/s
degree: 0 to 2,147,483.647 rev/s

For 0.1 rpm: 0 to 6500.0

-
(2-64)
UM 00722
-UM 007EF
The following areas are allocated to each axis.

Actual speed monitor value: 2 words

-
(Note): When "Extend monitor value" in MC common settings is set to "1word", this area is always "0".
16.5.8 Positioning Control Starting Table Number Setting Area
● :
Available, -: Not available
Axis no.
Unit
memory
no. (Hex)
Name Default Description R W
1 UM 00990
Positioning
control start
table number
U1
Set the table number of each axis starting the
position control.
 
Range: Standard area: 1 to 1000
Expansion area: 10,001 to 10,100
(2-64
Virtual 1-32) UM 00991
-UM 009EF
The following areas are allocated to each axis.

Positioning control start table number: 1 word
 