Digital Video Recorder
49
Figure 40 : Camera – PTZ setup screen.
NOTE: You will only be able to set up PTZ devices if the PTZ port is set to RS232 or RS485.
Highlight the box in the
Product
column for the PTZ camera you wish to configure
and press the
button. A list of PTZ devices appears. Select your camera
from the list and press the
button. You will need to connect the camera to
the RS232 or RS485 connector on the back of the DVR following the camera
manufacturer’s instructions.
You can assign IDs to each camera by highlighting the box under the
ID
heading and pressing the
button. Change
the number by highlighting it and using the
Up
and
Down
arrow buttons to increase and decrease the number. The
PTZ ID number can be set from 0 to 256.
Highlight the
Setup…
box and press the
button. The Port Setup window appears.
Configure the port’s setting based on the PTZ camera manufacturer’s instructions.
Network Camera
Highlight
Network Camera
and press the
button, and the Network Camera setup
screen appears. (Network Devices
Only)
NOTE: “Network Camera” includes both network cameras and network video transmitters.
