User’s Manual
42
Alarm-Out
Highlight
Alarm-Out
and press the
button. The Alarm-Out screen allows you to change the settings and establish
a schedule for each alarm output from the DVR.
Figure 32 : Device – Alarm-Out setup screen.
Highlighting the box beside
Dwell Time
and pressing the
button allows you to set the dwell time of the alarm output.
Dwell times range from 5 seconds to 15 minutes.
Each alarm output can be given its own title by highlighting
Title…
and pressing the
button. A virtual keyboard
appears allowing you to enter the title.
You can add and edit alarm output schedules. Highlight the
+
and press the
button to add a schedule. Highlighting
the boxes under the
Column
heading and pressing the
button allows you to edit the information in those boxes.
Highlighting the boxes under the
Day
box and pressing the button allows you to select the days that the alarm schedule
will be active. The choices are: Sun, Mon, Tue, Wed, Thu, Fri, Sat, M~F, Hol and All.
Highlighting the boxes under the
Range
box and pressing the button allows you to set the time that the alarm schedule
will be active in 15-minute increments from 00:00 to 24:00.
Highlighting the boxes under the
Mode
box and pressing the
button allows you to set how the alarm reacts during
the scheduled time. When set to
On
, the Alarm-Out is active during the scheduled time. When set to
Event
, the
Alarm-Out is only active when there is an Event during the scheduled time.
Highlighting the boxes under the
Channels
box and pressing the button allows you to set which alarm outputs will
be active. You can also select the DVR’s internal buzzer.
The box allows you to delete an alarm output schedule. You will be asked to confirm whether or not you really wish
to delete the schedule.
