E-023-2-E
②
The following window will be displayed (Fig. 117). Select the simulated output value and click the
"Start" button. To pick another current value to output, select "Other" and click the "Start" button after
inputting the analog value.
Click the "Cancel" button to exit "Fix Analog".
③
Click the "Start" button to display a message box (Fig. 118). Click the "OK" button to start "Fix Analog".
Click the "Cancel" button to return to the window shown in Fig. 117.
④
Click the "OK" button to cause the set analog value to be outputted. While the simulated output value
is being outputted, a message at the bottom of the window will indicate that the system is "creating
simulated output", as shown in Fig. 119.
Click the "Stop" button to halt the simulated output.
⑤
After the "Stop" button is clicked, a message box (Fig. 120) will be displayed. Click the "OK" button.
⑥
Clicking the "OK" button would return the interface to the window shown in Fig. 117, so click the
"Cancel" button to exit "Fix Analog".
Fig.117
Fig.118
Fig.119
Fig.120
Click here and input a
value to set any analog
simulated output.
