E-023-2-E
3.6.2 Output settings (Outputs)
3.6.2.1 Analog and pulse assignment (Analog/Pulse Assign)
①
Click the "Setup (S)" menu, and then select and click "Analog/Pulse Assign" from the "Outputs" drop-
down list.
②
The following window will be displayed (Fig. 23). Assign analog output 1 and 2 here, as well as pulse
output 1 and 2.
③
Set each item assignment. Make your selections from the drop-down lists by clicking the triangles on
the right side of each item, as shown in Fig. 24, Fig. 25, and Fig. 26.
If the "Sensor type" is CB or CS, then the "Pulse output 1" and "Pulse output 2" selection items will be
fixed at "Mass flow", and therefore will not be displayed.
Also, when the "Pulse output 2" selection items "Double Pulse 90", "Double Pulse -90", and "Double
Pulse 180" are selected, the setting becomes the phase difference with "Pulse 1".
Fig.23
Fig.24
Fig.25
Fig.26
