E-023-2-E
2
3.6.4 H/L alarm setting (H/L alarm)
3.6.4.1 H/L alarm assignment (H/L alarm assign)
①
Click the "Setup (S)" menu, and then select and click "H/L alarm assign" from the "H/L alarm" drop-
down list.
②
The following window will be displayed (Fig. 51). Set the H/L alarm assignment here.
③
Click the triangle on the right side of "H/L alarm assign" and select the assignment to set from the drop-
down list as shown in Fig. 52.
④
After all settings are complete, click the "OK" button to display a message box (Fig. 53).
Click "OK" here to change the settings to the inputted values, and to reflect the changed setting values
in the flowmeter
’
s output. For the sake of safety, if the flowmeter
’
s output is used to control valves or
other such parts, then change that control loop to manual control so that the control loop is in a state
whereby it is not influenced by the flowmeter
’
s output.
⑤
Click "OK" to change the settings to the selected values, and then click the "OK" button in the
displayed message box (Fig. 54) to complete the setting process.
Also note that when the assignment is changed, this can cause the "H/L Alarm Point Set Alarm" to
occur. If this happens, the screen shown in Fig. 55 will be displayed after the change.
Fig.51
Fig.52
Fig.53
Fig.54
Fig.55
