PB
Total 0000 kWH
Total 000.0 kAH
BACK DCkWH
The
Secondary Stats
screen shows the total accumulated
DC and AC kilowatt hours and kiloamp hours of the
FLEXmax 80.
Pressing the
<DCkWH>
soft key switches the screen
between DC kilowatt hours and AC kilowatt hours
•
DCkWH
shows the DC kilowatthours and should be used
in a non-grid-tied system
• A
CkWH
is used with a grid-tied system. This measure is
based on a 90% inverter efficiency (1 kWH DC= 0.9 kWH
AC)
Pressing the first soft key three times returns to the
MAIN
Menu screen.
Total 0000 kWHAC
Total 000.0 kAH
BACK ACkWH
Secondary STATS screen
Содержание FLEXMAX 80
