OPW Petro Vend 200 M1010, Инструкция по установке, эксплуатации и обслуживанию

Страница: 59 / 98

The LED Ring, Clip and Bracket are assembled at the factory for the upgrade kit. Reference steps 4-5 if it is
necessary to assemble the parts in the field again.
4. Hold the LED Ring (50-3199 [A]) against the bracket (51-0448) hole as shown.
5. Squeeze the large end of the LED Clip (50-3199 [B]) and push it through the bracket hole and LED
Ring until it snaps in position.
Doc. No.: M1010 Rev.: 10
Page 59 of 98