OPW Petro Vend 200 M1010, Инструкция по установке, эксплуатации и обслуживанию

Страница: 25 / 98

This conduit is required when you use RS-485 Communication wire that doesn’t meet requirements to be
installed in the Terminal Power Conduit, or you choose to have separate conduit. This conduit should run
from where the Petro-Net junction box is mounted to each terminal. This conduit may be looped from
terminal to terminal.
Terminal Communication and Power Wiring Requirements
Terminal Feed Minimum #14 AWG Stranded (Black) – Oil/Gas resistant, Wet Locations
Terminal Neutral Minimum #14 AWG Stranded (White) – Oil/Gas resistant, Wet Locations
Terminal Ground Minimum #14 AWG Stranded (Green) – Oil/Gas resistant, Wet Locations
Petro-Net (RS-485) Two (2) #18 AWG twisted (10 per ft) pair – Oil/Gas resistant, Wet Locations
Doc. No.: M1010 Rev.: 10
Page 25 of 98