!
!
3-1
Section
Specifications
22
3-1
Specifications
3-1-1
Crimp Terminals and Cables
The terminal block uses M3 terminal screws. Use appropriate
crimp terminals for M3 screws, as shown below. Tighten the
screws to a torque of between 0.5 and 0.6 N
S
m. After wiring,
check to make sure that the wiring is correct.
Caution
Cover the terminal blocks with the Terminal Block Protection
Covers. Uncovered terminal blocks can result in electric shock.
Forked
Round
6.2 mm max.
6.2 mm max.
Applicable wire size: Insulated wire, 1.31 to 1.65 mm
2
(AWG16
to AWG15)
3-1-2
Specifications
Caution
Use a DC power supply with safe extra low-voltage circuits on
the secondary side. Excessively high voltage can result in elec-
tric shock.
Input Specifications
Item
V530-R150E-2 (NPN model)
V530-R150EP-2 (PNP model)
Input voltage
12 to 24 VDC
±
10%
ON current
3 to 15 mA
ON voltage
8.8 V max.
OFF current
0.1 mA max.
OFF voltage
4.5 V min.
ON delay
RESET input: 10 ms max.
Others:
0.5 ms max.
OFF delay
RESET input: 15 ms max.
Others:
0.7 ms max.
Internal circuits
Input
terminal
COM IN
Input
terminal
COM IN
Содержание V530-R150E-2
Страница 1: ...Cat No Z140 E1 2 V530 R150E 2 V530 R150EP 2 OPERATION MANUAL 2 Dimensional Code Reader Fixed Type ...
Страница 90: ...5 3 Section STEP 2 Setting Reading Conditions 78 11 Press the ESC Key once more to return to MON monitor mode ...
Страница 236: ...Cat No Z140 E1 2 Note Specifications subject to change without notice Printed in Japan 1100 1M A Authorized Distributor ...