Omron V530-R150E-2, Руководство по эксплуатации

Страница: 37 / 236

3-1 Section Specifications
24
There are 3 kinds of COM OUT (*1 to *3) for each output terminal.
Connect with reference to the following table.
A
Top Bottom
+
Power supply
NC Not connected
–
o e su y
Appropriate ground
RUN Control output ERR Error output
BUSY
Co o ou u
GATE Control output
OK/NG Judgment output NC Not connected
COM OUT
(*1) For RUN, ERR, BUSY,
GATE, and OK/NG RESET Restart
DSA Prohibited to use TRIG A Trigger input (One shot
mode)
COM IN TRIG B Trigger input (Continuous or
Level Trigger mode)
B
Top Bottom
DO 1
Coincidence output
DO 0
Coincidence output
DO 3
Co c de ce ou u
DO 2
Co c de ce ou u
DO 5 Prohibited to use DO 4 Prohibited to use
DO 7
o b ed o use
DO 6
o b ed o use
NC Not connected COM OUT
(*2) For DO 0 to DO7
DO 9 Prohibited to use DO 8 Prohibited to use
DO 11
o b ed o use
DO 10
o b ed o use
DO 13 DO 12
DO 15 DO 14
COM OUT
(*3) For DO 8 to DO15
Note 1. Do not reverse the connections of the signal terminals and
COM terminals.
2. Do not use RESET input immediately after power is turned
ON.
When using RESET input to synchronize execution timing,
wait at least 1 s after turning ON the V530-R150 power sup-
ply before turning ON the RESET terminal.