![background image](http://html1.mh-extra.com/html/omron/v530-r150e-2/v530-r150e-2_operation-manual_741960120.webp)
6-1
Section
SET (Setting) Mode
108
3
Select the gray edge value (i.e., the ratio of black and white)
used to detect finder patterns. (Setting range: 1 to 127;
default setting: 32.)
If the ratio of the intensity of black and white is large, set to a
large value, and if the ratio of the intensity of black and white
is small, set it to a small value.
This setting can be made using the teaching function (which
automatically measures the optimum value), so whenever
resetting the reading conditions, always use this function
first.
→
4
Select whether Gray Edge Value Retry is necessary. If it is
turned ON, and reading is not correctly performed, then the
reading will be attempted again with a higher or lower gray
edge value. (Default setting: OFF)
5
Select the number of times reading is repeated in the event
of incorrect reading. A fresh image will be obtained and
reading performed for the number of times specified. (Set-
ting range: 0 to 9; default setting: 0.)
Normal Procedure
1
Select
Read QR (Normal).
2. Image Analysis
0. Image Adjust
1. Read QR (Normal)
2
Select
Reading Settings (Manual).
The parameters will be displayed.
Display Settings
Reading Settings (Teaching)
Reading Settings (Manual)
Function Settings
Содержание V530-R150E-2
Страница 1: ...Cat No Z140 E1 2 V530 R150E 2 V530 R150EP 2 OPERATION MANUAL 2 Dimensional Code Reader Fixed Type ...
Страница 90: ...5 3 Section STEP 2 Setting Reading Conditions 78 11 Press the ESC Key once more to return to MON monitor mode ...
Страница 236: ...Cat No Z140 E1 2 Note Specifications subject to change without notice Printed in Japan 1100 1M A Authorized Distributor ...