6-4
Section
System
162
8
Select OFF or ON. (Default setting: OFF)
The number of digits are shown in bytes. A letter or a num-
ber is 1 digit.
9
Select Normal or Host link (Default setting: Normal)
Normal
If
Normal is selected for the communications mode, it is possible
to communicate with host devices such as personal computers
with normal format via RS-232C.
MON (Monitor) Mode
Receives command inputs, but the reading results are not out-
put.
RUN Mode
Possible to input commands and output the reading results.
Timeout
[ 5]s
Flow control
None
A
B
1
None:
No flow control. (Default setting)
RS/CS:
The hardware performs flow control. Use a
cable that connects the RS and CS signals of
the V530-R150 and external device. Data is
transferred when the CS signal from the exter-
nal device is ON.
Xon/off:
The software performs flow control. Data is
transferred according to the Xon/off codes from
the external device.
Multi Drop: Select when using with multi drop. Turns on RS
signals when data are transmitted.
Note When multi drop is selected,
SYS/Multi drop is au-
tomatically set to ON.
Содержание V530-R150E-2
Страница 1: ...Cat No Z140 E1 2 V530 R150E 2 V530 R150EP 2 OPERATION MANUAL 2 Dimensional Code Reader Fixed Type ...
Страница 90: ...5 3 Section STEP 2 Setting Reading Conditions 78 11 Press the ESC Key once more to return to MON monitor mode ...
Страница 236: ...Cat No Z140 E1 2 Note Specifications subject to change without notice Printed in Japan 1100 1M A Authorized Distributor ...