Omron V530-R150E-2, Руководство по эксплуатации

Страница: 221 / 236

9-3 Section Troubleshooting
209
9-3 Troubleshooting
Connection Errors
The power indicator is not lit.
•
The power supply is not connected properly.
•
The supply voltage is not 24VDC+10%/–15%.
The monitor is blank.
•
The power of the monitor is not ON.
•
The monitor cable is not connected properly.
•
The monitor is malfunctioning.
•
The power supply is not sufficient for the LCD monitor (when
the LCD monitor is used).
Cannot make key inputs from the Console.
•
The Console cable is not correctly connected.
Camera images do not appear on the screen.
•
The lens cap has not been removed.
•
The camera cable is not properly connected.
•
The lens diaphragm is opened or closed too far.
•
The shutter speed is not suitable.
•
The lighting method is not suitable.
The images on the monitor are not clear.
•
There is electrical noise entering from the power supply or
cables.
•
The monitor cable is not correctly connected.
The images on the monitor are hard to read.
•
Refer to the entry for the error code in
9-2 Error Codes and
Countermeasures. Change the setting conditions and adjust
the camera and lighting.
•
If reading was performed in Normal mode, try reading in Pat-
tern mode.
Errors During Menu Operation
The reading results are not displayed on the monitor.
•
The V530-R150 is not in MON (monitor) or RUN mode.
Terminal Block Errors
Trigger signals (input signals) are not received.
•
The cables are not correctly wired.