Omron OMNUC 88D-UP20HA, Руководство пользователя

Страница: 9 / 210

!
!
!
!
!
!
!
!
!
!
!
Caution Take appropriate measures to ensure that the specified power with the rated voltage
and frequency is supplied. Be particularly careful in places where the power supply
is unstable. An incorrect power supply may result in malfunction.
Caution Install external breakers and take other safety measures against short-circuiting in
external wiring. Insufficient safety measures against short-circuiting may result in
burning.
Caution Provide an appropriate stopping device on the machine side to secure safety. (A
holding brake is not a stopping device for securing safety.) Not doing so may result in
injury.
Caution Provide an external emergency stopping device that allows an instantaneous stop of
operation and power interruption. Not doing so may result in injury.
Caution Take appropriate and sufficient countermeasures when installing systems in the fol-
lowing locations:
S
Locations subject to static electricity or other forms of noise.
S
Locations subject to strong electromagnetic fields and magnetic fields.
S
Locations subject to possible exposure to radioactivity.
S
Locations close to power supplies.
Operation and Adjustment Precautions
Caution Check the newly set parameters for proper execution before actually running them.
Not doing so may result in equipment damage.
Caution Do not make any extreme adjustments or setting changes. Doing so may result in
unstable operation and injury.
Caution Separate the Servomotor from the machine, check for proper operation, and then
connect to the machine. Not doing so may cause injury.
Caution When an alarm occurs, remove the cause, reset the alarm after confirming safety,
and then resume operation. Not doing so may result in injury.
Caution Do not come close to the machine immediately after resetting momentary power
interruption to avoid an unexpected restart. (Take appropriate measures to secure
safety against an unexpected restart.) Doing so may result in injury.
Caution Do not use the built-in brake of the Servomotor for ordinary braking. Doing so may
result in malfunction.